- Заголовок: прокатная линия
- Дата выпуска:
- Разработчик:
- Издатель:
Information about Rolling Line is still incomplete. Пожалуйста, помогите нам заполнить детали игры, используя это контактная форма.
A simple list of the minimum turntable diameters for every vanilla locomotive in Rolling Line, to be used as a reference when building layouts with particular locomotives in mind.
Введение
This is a simple reference guide intended for use when designing and building custom layouts. If you have a particular locomotive or two in mind for your layout, this guide can tell you the minimum size your turntables need to be, and therefore how much space you must allocate for them.
One thing to take into account is that the numbers listed in this guide are based on the minimum turntable size that the locomotive in question needs in order to be placed on said turntable. Some locomotives, such as the Steam JGR, may be able to use a smaller turntable than the number given, but this is not recommended.
Фактически, I’d recommend that you make your turntables one unit larger than the numbers given, to give yourself a little extra leeway when driving the locomotive onto the turntable.
Turntable Lengths (Single Unit)
This section provides turntable lengths for single unit locomotives только. Например, the Steam Flyer length does нет include the required length for the tender. For this information, see the following section.
- Commuter Sprinter: 6
- Diesel AC44: 7
- Diesel DA: 5
- Diesel DG: 5 (Примечание: It technically fits but it really doesn’t. Definitely use 6.)
- Diesel DX: 5
- Diesel F7A: 5
- Diesel NR: 7
- Diesel U20C: 5
- Electric V8: 8
- Electric Side-Rod: 5
- Rotary Plow: 5
- Shunter DSJ: 4
- Steam Berkshire: 6
- Steam BigBoy: 8
- Steam Challenger: 8
- Steam Flyer: 4
- Steam JGR: 3 (Примечание: Will spin on 2 if you’re very good at parking, but cannot be placed on 2.)
- Steam Ka: 5
Turntable Lengths (Multiple Units)
This section provides turntable lengths for multiple-unit locomotives. Например, the Steam Flyer length takes into account the required length for the tender. All unit pairings are listed for convenience.
- Commuter Sprinter x2: 12
- Diesel F7A + F7B: 10 (Примечание: Also valid for F7A + F7A. And F7B + F7B if you’re doing that for some reason.)
- Rotary Plow + Tender: 9
- Steam Berkshire + Tender: 11
- Steam BigBoy + Tender: 13 (Примечание: It can fit on 12, but only if the tender is placed first.)
- Steam Challenger + BigBoy Tender: 12
- Steam Flyer + Tender: 7
- Steam Ka + Tender: 9
Это все, чем мы делимся сегодня для этого. прокатная линия гид. Это руководство было первоначально создано и написано HuskyDynamics. На случай, если нам не удастся обновить это руководство, вы можете найти последнее обновление, следуя этому связь.