Here we will take you through some basic concepts to help you in getting started, and to give you a head start in creating some innovative and interesting designs that will help you in completing objectives, or give you the skills to easily demolish those pesky buildings!
Preface and Getting Started
Предисловие
It’s important to note that the game is still in active development, and will therefore change and evolve over time as we get closer to v1.0.
I’ll update this guide as necessary, но на данный момент, we’ll start off with something simple.
- If you’re more interested in doing missions instead, this guide will still be helpful but is not directed towards a particular vehicle type. More varied and advanced guides are still being written, but some have already been put up on вики.
Начиная
Load the game and go to Sandbox. This is where you should start if you are wanting to build contraptions to mess around and have fun with.
We’ll start by using the Horizon Cab
Убедитесь, что у вас есть Mirroring enabled (shortcut key: М), as this will save a lot of time, and most vehicles that we create are mirrored.
Building a frame using 6-way connectors
Now we’ll choose the 6-Way piece from the Frame Split category, and attach one to the sides of the cab, вот так:
We can extend the sides further by placing a few more 6-Way splits.
Держать твой Right Mouse Button and drag to orbit the camera around the highlighted piece.
- We use the 6-Way pieces in order to prepare for adding more detail later.
Adding wheels
Отсюда, we have a few options on adding motion. Для этого руководства, we’ll add simple powered wheels to get our vehicle moving.
Выберите Wheel category и выбери Powered Large Wheel.
Place these wheels at the front and rear of the sides of the vehicle, вот так:
Testing our creation
Now test your creation by pressing Пробел, or by going to the top menu bar, and pressing Играть.
We’re done!
Использовать [Вт] [А] [С] [Д] to move Forwards, Назад, Левый, и правильно.
- It’s a good idea to сохранять our creation by opening the Vehicle menu (shortcut key: В) and pressing Save Vehicle.
Move onto the next section to continue adding some more advanced options to your vehicles, such as Steering Wheels, Приостановка, and a Plow!
Enhancing our simple vehicle
We’re going to add some suspension. Но сначала, we’ll have to delete the wheels we placed in the previous section of the guide.
You can do this by highlighting the wheels, and pressing [Х] or Del to remove them.
Adding suspension
Перейти к Joint категория.
To add suspension to our vehicle, нажмите кнопку Side suspension кусок, и attach them to the sides of the cab where the previous wheels were, вот так:
Adding wheels that steer
Теперь мы можем re-add the wheels back, but this time we’ll add 2 разные типы of wheels.
Go to the Wheels category, and choose the same Powered Large Wheel as the start of the guide, but this time add them only to the rear of the vehicle.
For adding a wheel that steers, у нас теперь есть 2 different options as of Version 0.109, Steering Large Wheel, или Combo Large Wheel.
For this tutorial, we’ll stick to using the ‘classic’ Steering Large Wheel
- If you wanted to make your vehicle a Four Wheel Drive, вы можете использовать Combo Large Wheel вместо.
Place these wheels at the front suspension pieces of the vehicle, вот так:
Adding a Plow
We’ll now add a Plow object to the front of the vehicle, но сначала, we’ll need to add a 6-way connector piece between the front pieces:
To add the Plow, пойти в Utility category, и выберите Плуг объект. Attach this to the front 6-way piece we added in the step above.
Testing our enhanced creation
Now you can test your creation by pressing Пробел, or by going to the top menu bar, and pressing Играть.
We’re done!
Использовать [Вт] [А] [С] [Д] to move Forwards, Назад, Левый, и правильно.
A separate guide will be available soon where we continue adding even more advanced options to our vehicle, такой как Подруливающие устройства, Оружие, Magnets and Joints.
Это все, чем мы делимся сегодня для этого. Instruments of Destruction гид. Это руководство было первоначально создано и написано Дженкинс. На случай, если нам не удастся обновить это руководство, вы можете найти последнее обновление, следуя этому связь.