В этом руководстве, I’ll teach you how to make the Counter-Strike 2 Отлаживать / Build Info disappear from the bottom left of your screen. This will be useful if you’re using an OLED screen or if you find it bothersome.
Console Command
To hide the debug info, you’ll need to type a command in the developer console. If you already have the console enabled, the command to use is:
r_show_build_info 0
If you’re not sure how to open the console or it’s not enabled (it’s usually off by default), продолжай читать.
Примечание: If the debug text reappears after restarting your game, you can add it to an autoexec config file. I’ll show you how to create one in just a couple of minutes.
How to Enable Developer Console
If you haven’t enabled the developer console yet, just follow these two easy steps.
Шаг 1: Open the settings in Counter-Strike 2.
Шаг 2: Go to GAME, и изменить “Enable Developer Console (~)” to YES, just like it’s shown in the picture below.
Сейчас, you’ll be able to press the tilde (~) key located between ESCAPE and TAB on your keyboard.
Как только вы это сделаете, you can press this key, and you’ll be able to enter the command mentioned above.
Using this console command should remove the debug text, even if it comes back after restarting your game. Однако, if it reappears, keep reading for a solution.
How to Create an Autoexec File
An autoexec file is like a special settings file that runs when you start up Counter-Strike. It’s handy for folks who use the developer console to type in commands that reset each time you start a new game.
Here’s how to set one up:
Шаг 1: Откройте Steam и перейдите в свою библиотеку.. Find Counter-Strike 2 in your list of games, щелкните его правой кнопкой мыши, and choose Properties.
Шаг 2: В окне свойств, click on Installed Files and then hit the Browse button.
Шаг 3: A new window will pop up. Перейдите к “игра” папка.
Шаг 4: Внутри “игра” папка, искать “csgo” папка.
Шаг 5: В “csgo” папка, открыть “CFG” папка.
Шаг 6: После, you’ll need to right-click in the empty areas beside the items in the folder. Create a new Text Document. You can choose any name you like for this file, такой как “autoexec.” You can also delete the file later for cleanup, but it’s not necessary.
Шаг 7: В этот момент, you’ll notice the new text file is highlighted in blue. You can give it any name you prefer. я назвал свой “autoexec.” Если, по какой-то причине, a different text editor opens the file, you can use that if you’re comfortable with it, or manually select “Open With Notepad” from the submenu when you right-click on the file.
Шаг 8: Open the text file and paste in the command “r_show_build_info 0” (без использования кавычек).
Шаг 9: This is all the configuration file needs for now. В будущем, this file can accept other valid commands and can be used to automatically run them. Нажмите на “Файл” in the top-left corner of Notepad, then move your cursor to “Сохранить как…” и нажмите на него.
Шаг 10: A new window titled “Сохранить как” появится. Это должно выглядеть так:
Первый, изменить “Save as type:” drop-down menu from “Text Document (.текст)” к “All Files (.)”.
Следующий, delete the existing text in the field, тип “AutoExec.cfg” in brackets, и нажмите кнопку “Сохранять” кнопка.
Шаг 11: You can now close all the windows except for the Steam window.
Return to your library, find Counter-Strike 2, щелкните по нему правой кнопкой мыши, и выберите “Характеристики.” Затем, go to the General tab if it’s not already selected and scroll down slightly to reveal the LAUNCH OPTIONS. In this field, type the following:
+exec autoexec.cfg
Шаг 12: Вот и все! Если Контр-Страйк 2 isn’t already closed, you may need to restart it.
If you have any questions or need assistance, пожалуйста, не стесняйтесь оставлять комментарий, и я сделаю все возможное, чтобы помочь тебе.
Это все, чем мы делимся сегодня для этого. Контр-Страйк 2 гид. Это руководство было первоначально создано и написано бонк!. На случай, если нам не удастся обновить это руководство, вы можете найти последнее обновление, следуя этому связь.