Jak włączyć hamulec awaryjny i adaptacyjny rejsy w symulatorze ciężarówek euro 2

This guide will help you with everything you need to know about SCS software new features! – Adaptive cruise control and emergency braking

With the release of the public beta 1.44, SCS software also added the use of adaptive cruise control and emergency braking

Emergency Braking

Zupełnie jak w prawdziwym życiu, the emergency breaks work as follows:

The truck monitors the distance between you and the other person in front of you. If the distance is too close the truck will immediately apply full brakes and hazard lights. If this is a false alarm, you as the driver can still apply gas to accelerate and abort the heavy braking.

So how do you enable it in-game?

Because it is a feature that isn’t fully finished by now it’s relatively hard to access this feature. Pierwszy, you need to have to enable the center console (I won’t explain how to set this one up.

Please look at another tutorial for that up).

Potem, you start the game and load your profile.

1. Open now your console via the button ” ^ ” which is located on the upper left corner of your keyboard.
2. Type in the console ” g_emergency_brake 1 “
3. * The number indicates whether the feature is turned off ( 0 ) or turned on ( 1 )

Adaptive cruise control

Zupełnie jak w prawdziwym życiu, the adaptive cruise control works as follows:

You set your speed via cruise control. The truck will pick up the speed of the truck/car in front of you and will brake if needed to keep a safe distance between you and the person in front of you. If the person in front of you accelerates, you will also automatically accelerate.

So how do you enable it in-game?

Because it is a feature that isn’t fully finished by now it’s relatively hard to access this feature. Pierwszy, you need to have to enable the center console (I won’t explain how to set this one up. Please look at another tutorial for that up).

Potem, you start the game and load your profile.

1. Open now your console via the button ” ^ ” which is located on the upper left corner of your keyboard.
2. Type in the console ” g_acc 1 “
3. * The number indicates the distance in meters which the truck should keep between the truck/car in front of you and yourself. You can type any number from 1 Do 100 (polecam 30).

Known bugs

The features are all not fully implemented by SCS Software, therefore errors may occur!

• Phantom braking – When emergency brakes are enabled the truck will sometimes brake even when nothing is in its way
• Too late braking – Sometimes the truck starts to brake too late causing an accident
• No braking at all – Sometimes the truck won’t see anything in its path and won’t brake at all for traffic
• No stopping for decals – The truck doesn’t see any obstacles except traffic, so there’s no braking for light poles or boundaries!