증기 엔진 시뮬레이터 – 속도 악마 성취 가이드

• 제목: 증기 엔진 시뮬레이터
• 출시일:
• 개발자:
• 발행자:

모든 가이드 보기

Information about Steam Engine Simulator is still incomplete. 이것을 사용하여 게임의 세부 정보를 입력할 수 있도록 도와주세요. 문의 양식.

Achieving this is a straightforward process, although it may require some time. Simply reach a pressure of 300 PSI, then proceed to open the throttle valve and patiently wait.

속도 악마 성취 가이드

Reaching the desired pressure of 300 PSI

1. Fill the tank with water (keep the L button pressed).
2. Increase the heat to 100% (누르다 1 and use the scroll wheel).
3. Disable the relief valve (press X).
4. Deactivate the brake (누르다 3 and use the scroll wheel).
5. Open the throttle valve by 1% (누르다 2 and use the scroll wheel).
6. Start the engine (hold down the SPACE key). The engine should begin to rotate.
7. 이 시점에서, all that’s left to do is wait patiently.

Achieving a speed of 650 RPM

Assuming you already have a pressure of 300 PSI, 다음 단계를 따르세요:

1. Open the throttle valve completely (누르다 2 and use the scroll wheel). This should result in the RPM reaching approximately 630.
2. Continuously refill the tank with water (keep the L button pressed). If you prefer not to hold L manually, you can hold it down and switch to another program or window, and the action will continue without requiring constant button presses.
3. 선택적으로, manually rotate the engine (hold down the SPACE key). Although it is uncertain if this step makes a difference.
4. If you have followed these instructions correctly, you will need to wait until the RPM randomly reaches 650.

In my own experience, the steam engine reached a speed of 878.5 RPM.