Amerikanischer LKW-Simulator – Paccar Technical Facility Route Guide

This guide explains how to reach a place where you can test how much your truck can do, the Paccar Technical Facility. Please remember that you need the American Truck Simulator Washington DLC for this.

Route from Seattle

Head up north on Interstate 5. After passing Everett, take the third exit and turn left at the stoplight. Jetzt, Biegen Sie rechts ab. Even though the map might not show a road, there are no blockers, so you can go ahead. Continue on this road for a bit, und zu deiner Rechten, you’ll spot the facility. To enter, complete the security check at the gate, and follow the sign labeled „Deliveries.“

Route from Bellingham (Empfohlen)

Travel south on Interstate 5. Once you’re on the road, take the second exit to the south, then make a left. Später, take another left at the stoplight. Even though the map might not display a road, there won’t be any blockers, so go ahead and proceed. Follow this road for a bit, und zu deiner Rechten, you’ll come across the facility. To gain access, complete the security check at the gate, and be sure to follow the sign indicating „Deliveries.“

In the Facility

Once you’ve entered, stay on the left side until you reach the third gate, where you can choose either direction. After passing the second gate, you’ll find a parking lot with a gas station.

A bit further ahead, you’ll notice a newly added DAF XD truck from Euro Truck Simulator 2.

Zu Ihrer Rechten, there are parked trucks. If you park between the cones, you’ll have the option to take a break and sleep.

Wenn Sie nach rechts gehen, you can access the speed test track.

Alternative, you can cross the speed test track and head right to take on a series of durability tests, each marked by a sign. Please note that the corrosion pit doesn’t work.