Moto Racer 4 – Keyboard Steering Configuration Fix

• عنوان: Moto Racer 4
• تاريخ الافراج عنه:
• المطور:
• الناشر:

عرض جميع الأدلة

Information about Moto Racer 4 لا يزال غير مكتمل. الرجاء مساعدتنا في ملء تفاصيل اللعبة باستخدام هذا نموذج الاتصال.

This guide will be showing you the keyboard configuration to have a better and smoother steering experience. If you’re currently not comfortable with the current settings of the game, make sure to try this Moto Racer 4 steering configuration.

Moto Racer 4 Steering Configuration Fix

You’ll find that out of the box, even if you re-configure the controls the bike only steers in one direction. You either have to use a controller or you must edit a configuration file to steer in both directions.

Navigate to the game input file:

ج:\Users\<<your windows username>>\AppData\Local\MR4\Saved\Config\WindowsNoEditor\Input.ini

Use a simple text editor to edit the above file shown in bold (right click on it and select “Open with…”).

I recommend using Notepad / المفكرة ++ / Atom to open the file. (Caution: DO not use Wordpad or Word or Libre to open it).

The file must be edited with the following three lines added near the bottom of the file:

AxisMappings=(AxisName="MoveRight",Key=Right,Scale=1.000000)
AxisMappings=(AxisName="MoveRight",Key=Gamepad_LeftX,Scale=1.000000)
AxisMappings=(AxisName="MoveRight",Key=Left,Scale=-1.000000)

These three lines must be added right above the “PitchForward” key bindings (do a word search inside the file, it’s towards the end of it).

Now you should be able to use the arrow keys to properly steer left and right. Or any other keys you prefer, just replace the “Key=Right” و “Key=Left” with the proper key you wish to use.